What Is Sts Construction Exam Preparation (2016 Updates

Key Areas of Use:

Cladding Receiver
Brick Skid Cladding
Timber Cladding
Rain Shield Cladding
Highrise Building
New Build
Weatherproofing
Capsule Boards

Features:

Weatherproof & Water Resistant
Euro Class A1 Fire Rating (BS EN 12467)
Touch on Resistant
High Density
Frost Resistant
Mould Resistant
Vapour Resistant
External Heavy-Duty
Maintains Minimum Board Motility

Standard Lath Sizes:

2400mmx1200mm (6mm, 9mm & 12mm)
1200mmx800mm (9mm & 12mm)
1200mmx600mm (6mm, 18mm & 22mm)

Suitable For:

Internal & External Use
Timber or Steel Frame Build
Lightweight Steel Frame
Offsite/Modular Build
Modular Pods
Park Homes

Cut Guide:

Due to the density of the boards, we recommend using a STS PCD Blade (poly crystalline diamond) which are designed for use on fibre cement. They have 5 or 6 diamond tipped teeth which reduce grit and go along the blade absurd resulting in it lasting much longer and getting a clean cut end.

Handling Tip for Ceilings:

All-time practise for offer these boards into position for ceilings would be the use of an electric or manual console lifter. This makes information technology much easier to adjust the position and hold in place while fixing and tin can be purchased or hired from almost tool hire outlets.

6mm, 9mm and 12mm Construction Lath

Stock Code	Size	Bulk Quantity
5006	2400x1200x6mm	seventy
5509	1200x800x9mm	70
5009	1200x2400x9mm	40
5512	1200x800x12mm	75
5524	1200x2400x12mm	35

6mm

9mm

12mm

Lath Dimensions	6mm	9mm	12mm
Lath Dimensions & Weight	1200mmx600mm - 6.25kg 2400mmx1200mm - 28kg	1200mmx800mm - 12.8kgkg 2400mmx1200mm - 39.5kg	1200mmx800mm - 15.2kg 2400mmx1200mm - 45kg
Tolerance		0.2%
Exam Standard	BS EN 12467:2016 + A1:2016	BS EN 12467:2016 + A1:2016	BS EN 12467:2016 + A1:2016

Performance	6mm	9mm	12mm
Density	1.28g cm3	one.28g cm3	1.28g cm3
Linear Variation (change in moisture)	0.xvi%	0.sixteen%	0.16%
Angle Force (dry)	17.56 MPa	17.27 MPa	12.46 MPa
Angle Forcefulness (saturated in warm water)	12.97 MPa	14.93 MPa	12.91 MPa
Water Impermeability (unprimed)	No water germination after 24 hours Clammy patch covers tested area	No h2o germination later 24 hours Damp patch covers tested surface area	No h2o germination afterward 24 hours Damp patch covers tested area
H2o Impermeability (unprimed)	No water formation after 24 hours No damp patch in tested surface area after 192 hours	No water formation after 24 hours No damp patch in tested area after 192 hours	No water formation later on 24 hours No damp patch in tested area after 192 hours
Reaction to Fire	EuroClass A1 Non-Flammable (A1fl)	EuroClass A1 Non-Combustible (A1fl)	EuroClass A1 Non-Flammable (A1fl)
Test Standard	EN ISO 1182 & EN ISO 1716	EN ISO 1182 & EN ISO 1716	EN ISO 1182 & EN ISO 1716
Fire Insulation			BS 476 role 22 118 min burn time for timber frame party wall
Mechanical Characteristics - Bending Strength (MOR)	Class 2		Class 2
Immovability: Freeze-Thaw	Complied		Complied
Durability: Heat-Rain	Passed		Passed
Durability: Warm Water	Complied		Complied
Immovability: Soak-Dry	Complied		Complied
Exam Standard	EN ISO 1182 & EN ISO 1716	EN ISO 1182 & EN ISO 1716	EN ISO 1182 & EN ISO 1716
Pull through testing			Mean issue: 1650 Newtons
Pull out testing			Hateful result: 840 Newtons
Module of rupture (Dried Workout)			13:13 MPa
Thermal Electrical conductivity	≤0.35W/ (m.g)	≤0.35W/ (m.thousand)	≤0.25W/ (g.k)
Density	1.35g/cm3	ane.35g/cm3	1.23g/cm3

Yeah, the STS Construction Board can be used on applications both internally and externally. We by and large recommend our 12mm board for external application equally information technology is very heavy duty and conditions resistant.

We recommend rendering the fitted STS 12mm Construction Lath as soon as conditions let, although these boards tin be left fully exposed for up to 3 months prior to rendering. Pay detail attention to preparation of boards to receive render base of operations coat when boards have been exposed for a prolonged period. You must ensure boards have fully stale and that the surface is cleaned of whatever debris and dust that may have been attracted to the surface

We recommend either using our Fibre Cement Scoring Tool or a PCD cut bract which fits into a hand held circular saw. Dust extraction is recommended for this.

Portland Cement: binds the ingredients and is made with limestone, clay and iron. Cellulose Fibres: treated, organic fibres which act as a filler. Sand: highly durable and creates all weather performance. Water: dissolves the wood pulp; activates and hardens the cement. STS Construction Boards accept no need of fibreglass mesh for strengthening, which of form is almost impossible to recycle and very irritable when cutting.

To notice out where your nearest stockist is, just drop us a message in the live chat portal at the bottom right of your screen. We'll get someone on your example right away, and they'll be able to find the retailer closest to yous who stock exactly what you need. Our live chat function is open up during STS working hours, from 7.00am until 5.00pm Monday through to Friday.